Transfer Instructions

SINGLE COLOR SCREEN PRINT TRANSFER APPLICATION INSTRUCTIONS:

  • Temperature: 325º-350º
  • Pre-press garment for 5-7 seconds to remove moisture
  • Pressure: High
  • Press for 7-10 seconds
  • Hot peel
  • Commercial heat press required, an iron will not work.

DTF APPLICATION INSTRUCTIONS:

  • Temperature: 320º
  • Pre-press garment for 5-7 seconds to remove moisture
  • Pressure: High
  • Press for 10 seconds
  • Cold peel
  • Press again, using a teflon sheet or parchment paper to cover the transfer, for 10 seconds
  • Commercial heat press required, an iron will not work.

UVDTF APPLICATION INSTRUCTIONS:

  • Clean surface
  • Peel off backing
  • Apply decal to surface

These transfers are NOT repositionable. Recommended hand-wash only, not dishwasher safe.

 

CHENILLE PATCH APPLICATION INSTRUCTIONS:

  • Temperature: 325º-350º
  • Pre-press garment for 5-7 seconds to remove moisture
  • Pressure: High
  • Place patch on item, cover with teflon sheet
  • Press for 20 seconds
  • Turn item inside out, press for another 15 seconds

TROUBLESHOOTING:

For screen print transfers and DTF prints, check your heat press with an infrared thermometer to make sure your heat press is the temperature you set it as. Some presses run hotter or colder than others. They can also have hotter or colder spots. Testing with an infrared thermometer will allow you to gauge if there is a problem with your press.